Hogville Info
• 9,499,305 Posts
• 389,098 Topics
• 22,029 Hogvillians
THE RULES (Read 'em!)
Quick Links
Pick'Ems:Football      Basketball      Baseball
Sister Sites:Gridiron HistoryFearless Friday
Listen NOW:Game ON 103.3 
  
Pages: [1]   Go Down

Author Topic: Club reshafting  (Read 413 times)

0 Members and 1 Guest are viewing this topic.

GolfNut57

  • All-American Hogvillian
  • *******
  • Karma: +204/-899
  • Offline Offline
  • Posts: 4,344
Club reshafting
« on: May 04, 2017, 01:07:43 pm »

I have a older model Titleist 3W that has a steel shaft in it.  Is it possible to put a graphite shaft in it? Or is there a difference in the shaft tip diameters going from a steel shaft to a graphite shaft that makes that impossible. No idea what the flex is in the steel shaft but I would like to put a Sr flex graphite in the club. I figure there is no such thing as a Sr flex in a steel shaft.
Logged

cc

  • Senior
  • *****
  • Karma: +38/-25
  • Offline Offline
  • Posts: 765
Re: Club reshafting
« Reply #1 on: May 04, 2017, 07:57:06 pm »

Yes you can get an "A" flex or Sr. flex in steel.  Probably a .335 hosel and many options are available in Sr. flex.  Most club fitters will know and can give you options.  Probably run 15-20$ to pull the shaft that's in it and $25-300 for a new shaft.  So unless you are in love with the club, update to a 2 yr old one on eBay for $25-$100. 
Logged

Sponsored Ad



Hogville encourages you to do business with the following...

Wooderson

  • Senior
  • *****
  • Karma: +183/-545
  • Offline Offline
  • Posts: 1,119
  • Hogville.net
Re: Club reshafting
« Reply #2 on: June 13, 2017, 06:42:22 pm »

You can certainly put a graphite shaft in this club but more than likely you will need to add a bit of head weight. A steel shaft will be a bit heavier than the graphite so swing weight would be light unless you went over length.
Logged
Pages: [1]   Go Up
 

KARK
KWNA
Fox 16 Arkansas